FiberHome Router Login, Default IP & Password for ADMIN Access (2024)

FiberHome Router Login: To setup & configure the FiberHome router, it is very important to access the FiberHome router default login page. Kindly check the router bottom area to find the FiberHome Router IP Address & FiberHome default password or refer to the below table.

Default FiberHome Router Login

FiberHome Router Default Login is required to set, enable/disable, change necessary router settings such as., change the username/password, enable/disable network connectivity, upgrade firmware software, reset the router to factory setting, and more. There are several models in FiberHome for consumers. But the login procedure remains the same throughout any FiberHome model.

FiberHome Router Login Instruction Guide

Got a new router? The very first thing required to do is, setting up the router. To do that, log in to the FiberHome router is required. We want to help the user with a detailed guide.

The below instructions will help the user on how to login to my FiberHome router:

1. The first step is to connect the router with the computer PC /laptop using the LAN cable or use FiberHome wifi and connect to the router through the wireless network.
2. After connecting, use the preferred browser (Google Chrome, Mozilla Firefox, Opera, Safari, or Internet explorer of user choice and type the FiberHome router address in the browser address bar. Can’t find it? Kindly check the back-side of the router.
3. After accessing the router admin panel, fill the username and password from the above table. Users can find in the default username and password for FiberHome on the back-side of the router.

NOTE: The best way to connect with the router is through a wired connection using a LAN Cable which avoids uninterrupted connection whenever any settings are saved.

The above instructions are very simple and easy to follow. We hope this tutorial was really helpful with FiberHome login. After getting access to router admin, the user can do any of the above options:

• Setting up the Router
• Router Configuration
• Change FiberHome password
• Reset to Factory settings
• Upgrade Firmware

FiberHome Router Setup:

We will show users how exactly they can setup FiberHome for internet connection.

Follow the steps given below to setup FiberHome:

1. Connect to the router and access the router admin interface.
2. Enter the default open source credentials in the field given and log into the router.
3. Click on the Quick Setup option and choose the necessary settings to configure the network connection.
4. Complete the setup and save the necessary option.
5. Click on Save to complete the setup.

FiberHome Router Configuration:

The procedure is relatively simple, like the instructions that have already been provided.

Follow the steps given below to configure FiberHome settings:

1. Connect to the router and access the router admin page.
2. Log in to the router by filling in the login details in the given field.
3. Now, the user will be able to access several router settings.
4. Enable DNS setting, configure tri-band settings,
5. Click on the required section, and enable or change the settings as per user convenience and requirement.

Change the FiberHome Router Password:

After validating the FiberHome admin interface with the default password and login, follow the below steps to change the FiberHome password.

To change the router default password:

1. Navigate to System Tools/Settings.
2. Select the Password option from the sub-menu.
3. Verify old username & password.
4. Enter the new username and password.
5. Save the settings & restart the router.

To change the Wireless security password:

1. Click on the Wireless tab and then click on the Wireless Security sub-menu.
2. Several security options are available to pick from. Select the WPA/WPA2 – Personal option.
3. Now type the wireless password in the respective field box. This will be the user’s wi-fi password.
4. Click on Save to save the new wifi password.

Reset FiberHome to Factory Settings:

Follow the steps given below to factory reset your FiberHome:

1. Locate the Reset button present on the router. It is usually present at the back of the router. Use a pen or a paper clip to press and hold it for about 30 seconds.
2. Observe the LED light on the router. If it blinks or flashes, that means your router is resetting.
3. Unplug the router from the power supply for 30 seconds and plug it back in to complete the reset network process.

Update FiberHome Router Firmware Software:

Firmware upgrades are basically for bug fixes and general improvements.

Here the steps are given below to perform a firmware upgrade for FiberHome:

1. Check the model number and version of FiberHome so that the user can download the right firmware.
2. Go to the FiberHome Support Site, accept the license agreement, and download the firmware file.
3. Connect the router to the PC computer.
   It is recommended to upgrade firmware through wired connections only.
4. Access the routers web-based setup page from any web browser.
5. Enter the login credentials in the space provided.
6. Click on Administration Tab and then click on Firmware Upgrade.
7. Click the browse button present there.
8. Locate the file that the user downloaded from the support site and then click Open.
9. Click the Start Upgrade option and Continue when it prompts that the Upgrade has been successful.
10. Now TURN OFF and then TURN ON the router to complete the upgrade.

FiberHome Router Support:

If the user can’t log in to the FiberHome router or any problem while connecting the router, we would recommend checking the below solution for any common router problems.

Here are some of the common problems users might experience while setting up FiberHome.

• IP Address issue: Check the FiberHome IP address carefully, whether you had entered it correctly. It should not contain any alphabet.
  Wanna help? Refer to our article on how to find default router login ip.

• Forgot Router password: The only way to restore the password is router reset or reset to factory settings. To do the hard resetting, find a small hole on the sides of the router. Using a blunt pin, press and hold on the hole. This process will reset the FiberHome back to its factory settings.

• Router Admin not loading: This can be due to the connection problem. Check the cable or router wifi connection or wireless network, whether the router is connected to a laptop or computer, or PC. Try disconnecting the cable and restart the router and connect again.

Still if you experience any problem while connecting, we request you to contact the FiberHome support team or customer care. They will be available 24/7 through live chat.

Do comment below, we will take a look and could solve it.