FEMA IS 200C Answers 2022 [*Free Access*] (2023)

FAQs

Is 200 Basic Incident Command System for initial response? ›

IS200, Basic Incident Command System for Initial Response, reviews the Incident Command System (ICS), provides the context for ICS within initial response, and supports higher level ICS training. This course provides training on, and resources for, personnel who are likely to assume a supervisory position within ICS.

ICS 100, Introduction to the Incident Command System, introduces the Incident Command System (ICS) and provides the foundation for higher level ICS training. This course describes the history, features and principles, and organizational structure of the Incident Command System.

b - ICS for Single Resources and Initial Action Incidents [open html - 47 KB ] "ICS 200 is designed to enable personnel to operate efficiently during an incident or event within the Incident Command System (ICS).

1 Answer. Correct option is (c) It contains status information for briefing the incoming Incident Commander or other incoming resources.

This course was developed by the U.S. Fire Administration's National Fire Programs Branch, in partnership with the Federal Emergency Management Agency's Emergency Management Institute, the U.S. Department of Agriculture, and the National Wildfire Coordinating Group (NWCG). Estimated completion time: four hours.

A Type 2 incident may require the response of resources out of area, including regional and/or national resources, to effectively manage the operations, command, and general staffing.

Certification will expire 2 years from the date of issuance.

You can contact the Independent Study Program's Customer Support Center at (301) 447-1200 or independent.study@fema.dhs.gov. One of our Customer Support Representatives will look up your student record, verify your course completion and issue you a certificate via email.

Selection of Incident Commanders is done by the: Jurisdiction or organization with primary responsibility for the incident.

Course Description: ICS 200 is designed to enable personnel to operate efficiently during an incident or event within the Incident Command System (ICS).

Which incident type requires one or two resources with up to six personnel? ›

Characteristics of a Type 5 Incident are as follows: The incident can be handled with one or two single resources with up to six personnel.

Ensuring safe work practices is the top priority within the ICS common leadership responsibilities.

As ICS was being established the contractors working with the FIRESCOPE technical team developed a filing system to keep track of ICS notes, documents, and guides. Development documents and notes were filed away in 100 series, The 200 series was established for common forms, The 300 series for training documents, and ...

Purpose. The Incident Objectives (ICS 202) describes the basic incident strategy, incident objectives, command emphasis/priorities, and safety considerations for use during the next operational period.

The Incident Command Post, or ICP, is the location from which the Incident Commander oversees all incident operations. There is only one ICP for each incident or event.

Independent Study Program course certificates never expire.

If a candidate wishes to refresh their skills, you may retake the exam; however, FEMA's system will not re-score the exam and the original date of completion will remain on the candidate's certificate of completion.

So, having the test in a word document will help to go find the answer. (you will not have the FEMA course open while taking the test). Basically, it is an open book test.

Answer: No. Both ICS 300 and 400 are delivered in a classroom only. These courses are not suitable for online training since they both require a high level of interaction among participants and completion of complex classroom activities in order to meet the training objectives.

A Type 3 IMT or incident command organization manages initial action incidents with a significant number of resources, an extended attack incident until containment/control is achieved, or an expanding incident until transition to a Type 1 or 2 IMT. The incident may extend into multiple operational periods.

TYPE 5 INCIDENT: One or two single response resources with up to 6 response personnel, the incident is expected to last only a few hours, no ICS Command and General Staff positions activated.

What is a Type 1 incident? ›

Characteristics of a Type 1 Incident are as follows: This type of incident is the most complex, requiring national resources for safe and effective management and operation. All command and general staff positions are filled.

2.2 The ICS is a hierarchical classification which consists of three levels. 2.3 Level 1 covers 40 fields of activity in standardization, e.g. road vehicle engineering, agriculture, metallurgy. Each field has a two-digit notation, e.g. 2.4 The fields are subdivided into 392 groups (level 2).

Answer: Independent Study Program course certificates never expire. If you want to refresh your skills, you may retake the exam; however, our system will not re-score the exam and the original date of completion will remain on your certificate of completion.

This three-day course is designed for those emergency response personnel who would function in a Command or General Staff position during a large, complex incident or event or personnel who are or would likely be part of a local or regional Incident Management Team during a major incident, whether single agency, ...

You should allow 2 to 4 hours to take one of these courses. Allow more time if it's your first course, i.e.: IS-100. HCB. Independent Study program office as they are unable to provide assistance with these requests.

Certificates/Transcripts

Please contact EMI at https://training.fema.gov/contactus/ to process your request. You can contact the Independent Study Program's Customer Support Center at (301) 447-1200 or independent.study@fema.dhs.gov.

Completion certificates or an official student transcript can be requested by visiting the EMI Student Portal. To download an Unofficial Transcript, login to the EMI Student Portal and click on the Student IS Transcript button. You cannot request an official transcript by phone.

The more qualified person becomes the new Incident Commander at the beginning of the next operational period. The more qualified person has options based on agency guidelines; these can include assuming command, maintaining command, or requesting a more qualified Incident Commander.

The people who perform the other four management functions are designated as the General Staff. The General Staff is made up of four sections: Operations, Planning, Logistics, and Finance/Administration.

On most incidents, the command activity is carried out by a single Incident Commander. The Incident Commander is selected by qualifications and experience. The Incident Commander may have a Deputy, who may be from the same agency, or from an assisting agency. The Incident Commander may have one or more Deputies.

Which is an ICS single resource? ›

Single Resource: An individual, a piece of equipment and its personnel complement, or a crew/team of individuals with an identified work supervisor that can be used on an incident. ICS was designed by identifying the primary activities or functions necessary to effectively respond to incidents.

IS-700 NIMS: An Introduction is a Web-based awareness level course that explains NIMS components, concepts and principles. Although it is designed to be taken online interactively, course materials may be downloaded and used in a group or classroom setting.

When a more qualified person arrives on scene, which statement best describes what happens? The more qualified person has options based on agency guidelines: These can include assuming command, maintaining command as is, or requesting more qualified incident commander.

Type 4. Initial attack or first response to an incident. IC is “hands on” leader and performs all functions of Operations, Logistics, Planning, and Finance. Few resources are used (several individuals or a single strike team) Normally limited to one operational period.

A local or regional IMT (Type 4 or 5) is a single and/or multi-agency team for expanded incidents typically formed and managed at the city or county level or by a pre-determined regional entity.

Time Span: Limited to one operational period in the control phase. No written Incident Action Plan is required for non-HazMat incidents.

The Safety Officer has responsibility for monitoring on-scene safety conditions and developing measures to ensure the safety of all assigned personnel. One of the most significant potential safety hazards to be considered by the Safety Officer is the flow of traffic past an incident scene.

The Fire Officer is responsible for establishing command and completing three strategic priorities: Life Safety. Incident Stabilization.

Chain of command means that there is an orderly line of authority within the ranks of the organization, with lower levels subordinate to, and connected to, higher levels. The above ICS principles are used to communicate direction and maintain management control.

To participate in FEMA's ICS training, contact the state emergency management training office. The Emergency Management Institute (EMI) and the National Fire Academy (NFA) also offer ICS Train-the-Trainer classes at their Emmitsburg, Md., facility. A variety of other ICS training programs are available.

Whats the difference between NIMS and ICS? ›

Under NIMS, the State Operational Center (SOC) organizational structure reflects basic Incident Command System (ICS) functions. However, ICS is a field-based tactical communications system, whereas NIMS provides a system for managing the event at the local, operational area, region and state levels.

Purpose. The Assignment List(s) (ICS 204) informs Division and Group supervisors of incident assignments. Once the Command and General Staffs agree to the assignments, the assignment information is given to the appropriate Divisions and Groups.

The ICS 211 serves several purposes, as it: (1) records arrival times at the incident of all overhead personnel and equipment, (2) records the initial location of personnel and equipment to facilitate subsequent assignments, and (3) supports demobilization by recording the home base, method of travel, etc., for ...

The Activity Log (ICS 214) records details of notable activities at any ICS level, including single resources, equipment, Task Forces, etc. These logs provide basic incident activity documentation, and a reference for any after- action report.

The ICS 215 is used by the Resources Unit to complete the Assignment Lists (ICS 204) and by the Logistics Section Chief for ordering resources for the incident. Preparation. The ICS 215 is initiated by the Operations Section Chief and often involves logistics personnel, the Resources Unit, and the Safety Officer.

The EOC supports the following incident management functions. An EOC is not an on-scene incident command post (ICP) - where the focus is on tactics to deal with the immediate situation. An EOC is used to support on-scene activities through the prioritization of activities and the allocation of available resources.

The On-Scene Command Post (OSCP) shall be utilized by the SITG to conduct on-scene or on-the-ground investigation. The tent or van OSCP shall be marked appropriately as “PNP On-Scene Command Post” and shall also be posted with the mobile phone or contact numbers of the SITG Commander, Deputy/TGC/Investigator-on-case.

Incident Command Post (ICP)

Typically, the ICP is located at or near the incident site and is the centre for management of on-scene and tactical operations. Planning and communications could also be coordinated from this location.

ICS 200 is designed to enable personnel to operate efficiently during an incident or event within the Incident Command System (ICS). ICS-200 provides training on and resources for personnel who are likely to assume a supervisory position within the ICS.

Incident Briefing ICS Form 201: Provides the Incident Commander (and the Command and General Staffs) with basic information regarding the incident situation and the resources allocated to the incident. In addition to a briefing document, the ICS Form 201 also serves as an initial action worksheet.

Which incident type requires regional or national resources with up to 500? ›

Incident type 1 requires regional or national resources, all Command and General Staff positions are activated, branches are activated, personnel may exceed 500 per operational period, and a disaster declaration may occur.

Type 4 is limited to one operational period, does not require a written Incident Action Plan, involves Command and General Staff only if needed, and requires several single resources.

1 Answer. When an incident expands, only the functions and positions necessary are filled.

A mutual aid agreement is a tool that you can use to enhance your resources during a high-demand incident. The National Incident Management System guideline for mutual aid helps with mutual aid planning and shows how to create legal agreements with others that include common practices and processes.

The Correct Answer: D. When a more qualified person arrives on the scene, then the more qualified person has options based on agency guidelines; these can include assuming command, maintaining command as is, or requesting a more qualified Incident Commander.

Characteristics of a Type 1 Incident are as follows: This type of incident is the most complex, requiring national resources for safe and effective management and operation. All command and general staff positions are filled.

As ICS was being established the contractors working with the FIRESCOPE technical team developed a filing system to keep track of ICS notes, documents, and guides. Development documents and notes were filed away in 100 series, The 200 series was established for common forms, The 300 series for training documents, and ...

The briefing form is prepared by the Incident Commander for presentation to the incoming Incident Commander along with a more detailed oral briefing. Distribution. Ideally, the ICS 201 is duplicated and distributed before the initial briefing of the Command and General Staffs or other responders as appropriate.

TYPE 5 INCIDENT: One or two single response resources with up to 6 response personnel, the incident is expected to last only a few hours, no ICS Command and General Staff positions activated.

A Type 3 IMT or incident command organization manages initial action incidents with a significant number of resources, an extended attack incident until containment/control is achieved, or an expanding incident until transition to a Type 1 or 2 IMT. The incident may extend into multiple operational periods.

What is a Type 4 incident? ›

Type 4. Initial attack or first response to an incident. IC is “hands on” leader and performs all functions of Operations, Logistics, Planning, and Finance. Few resources are used (several individuals or a single strike team) Normally limited to one operational period.

Time Span: Limited to one operational period in the control phase. No written Incident Action Plan is required for non-HazMat incidents.

Characteristics of a Type 5 Incident are as follows: The incident can be handled with one or two single resources with up to six personnel. Command and general staff positions (other than the incident commander) are not activated.

Operational Period: The period of time scheduled for execution of a given set of operation actions as specified in the Incident Action Plan. Operational Periods can be of various lengths, although usually not over 24 hours. Operations Section: The Section responsible for all tactical operations at the incident.